Last seen: Sep 4, 2021
Oh for sure I can just flip the map on and off from the web interface, that would work just fine. I was just curious if there was a way to integrate t...
I'll share my node-red setup when I have it all defined and built out, but here's a quick example of 1 possible mode. Pulls the latest observation dat...
I actually just saw that post, looks like that's really the issue and I didn't look around enough first. Used the fix and now the webUI runs again, ex...
And just for fun, this isn't my first LED based weather data project. I designed this silly 3d printed "lamp" that displays basic animations to repres...
Ok, autoshutdown. Caveat to this, I did not design this circuit, some friends at my local makerspace did when they were designing RFID access control ...
Ok, confirmed this was all assembly error probably combined with my auto shutdown stuff. I have it running with just 5V in, gnd, and the data to the L...
OK, this might be an assembly issue on my part. I found two pins that the switch uses accidently grounded. I cut those out, it started to head the rig...
Well, I just went and cut all the extra traces, so the only pins on the Pi that are connected to anything are the 5V, 3.3V, GND, and LED data out. Sam...
Well, a little progress. I changed the auto start setting back to no, rebooted, and now the airport config screen works. I'm able to flip all the LEDs...