Last seen: Nov 21, 2024
Good, that's the correct RPi IP so putting it into the browser with the :5000 appended is what you need to do. The fact that you tried this and its st...
Ok, then next take a look at the logfile. cd /NeoSectional sudo nano logfile.log You can copy and paste the bottom portion here for me to look ...
I am wondering if the URL is wrong. The zero in 192.168.0.114 is normal reserved for router level URL's. I could be wrong but I have never seen this l...
Hi, this typically happens because the URL was not properly entered into the web browser. For instance if your RPi's IP address is; 192.168.1.1 T...
That looks great. Here's the OS information from the 'System Information' page of the web interface; OS Info PRETTY_NAME="Raspbian GNU/Linux 10 (...
Thanks for that insight. I know that the map cannot be running if the individual lights are needed to be controlled via the airports page. So maybe th...
I'm sure it can, but from a practical standpoint its hard to believe a board could be built that would support more than 500. If you would like more, ...
I'll have to download the latest image and verify. For now, if you don't use the 'check for update' menu item you won't get that error message. Once I...
I have never tried it. Sounds interesting though. The only concern might be the pin numbering. The software is hard coded to specific GPIO's on the RP...
Thanks for the update. I know we had the same issue with the 4a when it came out, but the update discussed took care of the issue. I'll have to purcha...
Sounds great. Let me know when they have their api ready to use. Preferably it would return an XML file with the pertinent weather data. At that point...
That's coincidental that you mentioned that because that happened to me this weekend too. The cause, at least on my end was the length of time for the...
Hi, I looked at the links you provided and I didn't see an API available and the autotaf.me site wouldn't display any information. So I'll look at ...
Yep, Sorry for that. The short story is the server that holds update files is not responding correctly. So a new image was released on the downloads...
If I remember correctly, wpa_supplicant.conf is only read and used on the very first boot of an image. In other words you need to burn an image, then ...