Last seen: Nov 21, 2024
Since you can access the RPi via the web interface, go to the 'Map Utilities' menu and download the logfile and post it here so I can read it. It woul...
Yes, you don't need a switch that can carry much current. It's just a change is voltage level that the RPi is looking for. So while this may be a bit ...
Hi Ron, I found these; But I haven't purchased any to try them. But being touch sensitive I'd guess it would work quite well. They are just a b...
Ron, it all depends at what point in the codes loop that you press the button. Especially as it pertains to OLED's the code timing loops to ensure all...
Correct. Your summary is dead on. - Mark
Ron, the refresh switch is connected to GPIO 22 (pin 15). The picture of the pinouts from the previous post unfortunately had pin 22 highlighted. So I...
Hi Ron, I tried it on my board when I got home today and it worked as expected. Please double check that the reset switch is connected to GPIO Pin 2...
Vance, the routine that goes out for the data is; while True: #check internet availability and retry if necessary. If house power outage, map may bo...
Vance, I've not experienced this. So this is perplexing to me. I'll be issuing an update in the next week or so and I'm hoping that what ever is causi...
Ron, the software is written to temporarily turn the map back on (5 mins in user settings) while its sleeping if the button is pressed. Are you saying...
Hmm, would you mind trying again then download the logfile and posting it here? That may help me see what's happening. - Mark
The FAA is refusing the request for the updated weather for some reason. How often are you updating the FAA weather? Early on we had problems where th...
To expand on Bills reply, be sure the arrow that is on the all the lights you add match the arrow's direction of the main string of 50 you have. If yo...
Great. Sorry for the hassle. This is a big project and there will always be something (as you know and have helped me with). Thanks - Mark
Ron, be sure to download your config.py, airports and hmdata file from under 'Map Utilities' before you re-burn the new image. That way you can import...