Last seen: Nov 21, 2024
Yes. If you go to the 'Settings Editor' under 'Sectional Map Settings', at the bottom of this section is a 'High Brightness' setting. Just lower the v...
Great! Glad it worked. I'll play with this feature for a future release. Thanks - Mark
Great news. Thanks for the feedback. Have fun. - Mark
Hi, download the logfile and post it here so I can take a look. I'm not exactly sure what you are describing, so maybe give me another description as ...
Hmm, This was done to give a definitive update to the commands going to all the strings. There is no setting to remove this although if you don't mind...
That's no problem. It happens to us all. Glad its working properly. Send us a picture once its done and hanging. - Mark
Hi, It looks like you have the Pi wired on the wrong end of the GPIO Pins. Check out and you'll see that you've got everything wired towards the hi...
Interestingly, I put a test together this past weekend using 2 strings (100 LEDs) of those low profile LED's and they work out of the box. I added a s...
Awesome! I'm very glad that you figured it out. It's a great object lesson for others building to ensure that the wires are properly connected. I ag...
Another thought: The length of the Digital In Wire has been mentioned by a few as having an effect on the lights. So keeping the length on the shorter...
Great looking map. Yes, I believe there is still an issue with the wiring being a faulty/intermittent. You can use the 'all on' and 'all off' and see ...
Hmm, I would have said that its the GRB vs RGB setting but you covered that one. So post the logfile here. Be sure to stop then startup the map. Give ...
That's great news. Please do post a picture or vid. Glad its working now. - Mark
Hi, When you use the LED Test, the LED's should cycle through a rainbow pattern a number of times then turn off. They shouldn't blink random colors....