Forum

I just checked the API used for v4.4xx and it was working properly. Tell us more about what your map is doing. If you haven't already done so, reboot ...

Thanks Ron. I'm guessing it's FAA system issue. Let's see if others do the same. - Mark

I tried it on their site,and it errored out there too. Hopefully they will fix it soon. - Mark

Great to hear. - Mark

Ron, if you want to wait few more days we'll have another image available that will be using the new FAA API which should be the 'Permanent' fix assum...

Kevin, I assume you found the post with the fix, or downloaded the latest image? If not, bounce back and I'll do my best to help. - Mark

Marty and I have been working through this, with the yeoman's amount of the lifting being done by Marty. So thank you Marty. Marty's fix jumps us to...

No, you shouldn't have to. The brightness is not linear though. In otherwords, 128 is not half as bright as 255. So the closer to 0 you get, the dimme...

@scott-g Yes, downloading the new image would be an easy way to do it, unless you are comfortable editing the files from the command line. The inst...

I just starting working on it and there is an error with urllib that is causing the error. I'm not sure why yet. More to come, hopefully. - Mark

Here's the text from the post that some have had issues accessing. This is a duplicate of that post. Also, the updated Image can now be downloaded a...

Hi all, Here's a post that will go through manually fixing this issue; If you prefer to reinstall using an image, we'll be uploading a new one sh...

I found the most solid way was to solder the connections, especially for the level controller. Adafruit sells a solderable proto board,/p> This prov...

I'm afraid I don't, but you can check out the admin page here; There may be contact info that you can reach out to. Also, while this may not be ...