Last seen: Nov 21, 2024
Assuming the 'shutoff map' log entry on the screenshot above has not been commanded by you, but is happening on its own; disconnect the lead that goes...
Tom, yes--post the picture and or video here so we can look at it. Also, post a picture of the RPI, wired to the breadboard and LED's all in one pictu...
Hi Dave, I looked and yes the 4 wire uses a different Adafruit library. So it will have to wait till I get ambitious and do an other major upgrade t...
Hi Dave, To answer your 4 wire answer; it has nothing to do with my software code, its due to the fact that you have to have a supporting library to...
To save the airports, you should be able to download airports file from the utilities menu. Then install/upgrade the software. Then use the import air...
I understand your concern. I've tried a few different things, but have ended up with what you have. I have handbuilt a circuit board to accommodate th...
Wow those are pretty. Nice job! Thanks for the pics. - Mark
Hmm, I guess I would suggest verifying the IP address that the RPI currently has. In other words, the router possibly has assigned a new IP address to...
Thanks for this. I have wondered how hard it would take to get a PCB professionally built. I've hand made all mine, and while they work they are not v...
Hi Tom, Glad that you got it up and running. The problem, in my experience is that you don't have a good ground connection between the LED's and the...
That's very interesting. When you read the documentation for this service it specifically states that 'constraint' should be used instead of 'true'. S...
Vance, Wow! Beautiful work. What an ambitious project. This is a great summary of your build. I made it a sticky post so it will stay at the top and...
That's a first for me. Do me a favor and turn off all the wipes. You can do that in the transitional wipes settings. Just set it to no. This transitio...
It sounds like your router re-assigned a new IP address. You can use Berrylan again to get the IP or you can look at the monitor if its hooked up, it ...
Bill is correct. If you can run the rainbow test command and it works properly then it has nothing to do with the wiring. It must be in the configurat...