Last seen: Nov 21, 2024
Nick, You may have done this already, but to be sure let me go through a few steps. If necessary we'll go further. With a monitor and keyboard co...
I understand completely. If you want to hedge your bet, copy the current image over to another SD card and keep the original one so you can bounce bac...
The level converter has a small notch on one end, and this notch needs to be positioned to the left as shown in the diagram I attached above. I can ge...
Sometimes you just have to show it who's boss! I'm glad it's working again. - Mark
If you haven't seen this, compare your wiring to this diagram to ensure nothing is switched. Also, verify you have the correct LED's. If you accid...
Great news! Please send pictures when your map is done. - Mark
Everything looks to be in order. There is a "Test LED" feature that you should try. Also Try turning the map on under the menu. The "turn on all" feat...
I'm not sure why you would lose access to the web interface. All that should be done through WiFi. Do you have WiFi setup on the RPi? If so, you shoul...
Disconnect the RPi's USB cable and let the LED's power supply provide the needed power for both the RPi and LED's that way there won't be a tug of war...
Yep, that's not an uncommon issue. The issue is caused by not having the LED's and the RPi effectively grounded together. Looking at the pictures it...
Juls, I looked at the code and it can be hacked, but it really needs to be re-written. So this will have to be an option for Version 5 if I ever sta...
Ron, I just checked my map running V4.381 to be sure I hadn't disabled the automatic startup and mine is setup properly. So if you don't mind, let's c...
Here's my test bed map; It shows only 32% used. Here's another map I built; So I'm not sure why yours is showing 100% used. If I can think o...
It would be worth expanding the file system to ensure it uses the entire SC Card. This can be done using raspi-config or you can use the web interface...