Last seen: Nov 21, 2024
Perfect. Thank you for that information. - Mark
Wow Steve, that's great information. I've never run into those locator strips. That will be very helpful. Are the custom length strings available t...
I'm sorry, I wish I could be of help with this. But you have ventured far from my knowledge base. I appreciate you continuing updating your progress h...
Nick, Theoretically you can connect all 500 end for end and assuming you have a power supply capable of providing the needed wattage, all will work. I...
Nick, that's a tough call. The great thing about Marty's approach is it turns out quite clean. However that comes at a price. Using LED strings would ...
Good deal. Let me know if I can help. Send a few pics when its done. - Mark
The test script is a loop setup to run through the LED's 10 times (I believe its 10 times). You should be able to just wait and it will finish itself ...
Shawn, I'm not exactly sure I understand. So let me describe what I think you are trying to do and you clarify as necessary. You want use a grass ru...
Rob, your map turned out great! Post a picture when you get it framed and hung. Thanks - Mark
That's a great looking map. At this point I would just reconnect the monitor and keyboard and at the cmd line enter; sudo raspi-config Select 'Sy...
hmdata holds the heat map data, so if you are not using this feature its of no concern. Let me know how it goes. - Mark
Sorry for the hassles. The messages in the picture are of the boot process and it hasn't yet tried to load and run the Livesectional software. My gues...
If you have access to the web admin page there is a 'System Information' link under 'Map Utilities' and it lists all sorts of info. To answer your que...
I tried duplicating an airport on one of my maps without issue. So I believe you shouldn't have a problem with this. But if you have more info about w...
Hi Rob, The best way to handle this is to mount the LED under K88R but in the web admin, put KRYW as its airport and then set this airport to your H...